Whether or not you need planning permission for your loft conversion, you will need have to meet building control regulations.   You can appoint a private building control company, or you can appoint the building control team from your local council.

Building regulations are in place to make sure that any work done is structurally sound, that the new room is fire safe and that sound is reasonably insulated between the loft and the rooms below.

For a loft conversion specifically, building regulations cover:

• Fire escape – many aspects will be monitored including fire resistant doors, smoke alarms and fire protection.
• Sound insulation – sound insulation between rooms will be assessed, as well as the party wall if you have a neighbour next door that also has a loft conversion.
• Floors – It is unlikely that the original ceiling joists will be able to support the new loft space, so new floor joists will be installed. They will need to be checked to ensure they support the structure adequately. New steels and beams may also be introduced; the inspector will check these too.
• Safety of Stair Design – For fire safety there will need to be a check on the staircase. The structure will also need to be checked to ensure there is enough support for the ceilings and floors.
• Doors and Windows – They should be energy efficient, so the building control inspector will check the thermal heat loss.
• Safety will also be assessed, for example if any glazed area in a window is below 800mm from floor level, 300mm from a door and up to 1500mm from floor level then safety glazing will need to be installed.
• Each window and door will be assessed for ventilation ensuring they provide the right amount, dependant on the room. For example, a bathroom or utility room will need to have higher levels of ventilation as there will be more moisture in the air than in a bedroom. In a bedroom, windows can be sufficient but, in a bathroom, you likely need an extractor fan and window(s).
• Fireproof doors may be required in unprotected areas, the inspector will evaluate the fire escape route and if there is a need for fireproof doors. They may also be required to be self-closing. Some windows may need to be fixed if there is a risk of a fire spreading to adjoining properties.  The new window being installed will need to be large enough for the means of escape. Normally you need to have a minimum of one window per room.

• Internal Walls – The internal walls will need to be checked if you are knocking through, building a new one, or opening a wall up. The impact this will have on the building will be factored in and if the wall is load bearing or not.
• Roof – the roof may be checked to see if movement has occurred with the alteration. Movement can create cracks in the walls or in the worst-case scenario the roof could collapse so it is important for it to be checked thoroughly by the inspector.
• External walls – The existing walls will need to be checked for the new weight to ensure they can take the load and structure stability. They will also be assessed for thermal efficiency and weather resistance. If the external wall is being re-rendered or cladded this will also need to be checked.
• Electrics – Your electrics must comply with building regulations so pick someone who is qualified and registered to be able to sign off the work. Notifiable jobs are installation of a new fuse box or consumer unit, installing a completely new circuit and alterations to an existing circuit.
• Kitchen and bathrooms – The kitchen and bathrooms themselves will not necessarily need to be checked by the building inspector but the ventilation, electrics, thermal performance, fire safety and drainage will be checked to ensure it is adequate.
• Drainage – If the roof size is being increased, then you may need to increase your rainwater pipes and gutters. This will be something the inspector will look out for. If you do not have sufficient drainage and gutters, then you could be at risk of flooding.

Building Control inspections should occur at regular intervals throughout the build. It is your or your builders’ responsibility to request a visit to your property at every stage so that if there be a problem, it can be rectified before it’s too late. If there is anything that does not meet building regulations, this will need to be corrected by your builder (that’s why it’s best to get a builder who is aware of building regulations J) before calling the inspector out again to give it the thumbs up.

At the end of the loft conversion project, the building inspector will do a final inspection to sign off and then provide a completion certificate.

If you are planning a loft conversion and need some guidance on how to go about it, give us a call on 0208 191 7595 or email us at enquiries@sdabuildlondon.co.uk to discuss how we can help.

To have a look at the kind of work we have done, why not download our free brochure? And if you need any help with managing your building project, our free project management checklist has been hugely popular.

The first step to any home building project, whether it is a basement conversion, home extension, kitchen extension or loft conversion is to determine whether you need planning permission. In the majority of situations you will need planning permission, however there are some instances where your works fall under permitted development.  (Find out what you don’t need planning permission for)

When it comes to loft conversions specifically, you don’t always need planning permission provided your conversion adheres to specific planning guidelines. Taken from the Planning Portal, these guidelines are:

• A volume allowance of 40 cubic metres additional roof space for terraced houses
• A volume allowance of 50 cubic metres additional roof space for detached and semi-detached houses
• No extension beyond the plane of the existing roof slope of the principal elevation that fronts the highway
• No extension to be higher than the highest part of the roof
• Materials to be similar in appearance to the existing house
• No verandas, balconies or raised platforms
• Side-facing windows to be obscure-glazed; any opening to be 1.7m above the floor
• Roof extensions not to be permitted development in designated areas**
• Roof extensions, apart from hip to gable ones, to be set back, as far as practicable, at least 20cm from the original eaves
• The roof enlargement cannot overhang the outer face of the wall of the original house.

If you plan on extending beyond the limits and conditions of Permitted Development (above), or your property is listed or located in a conversation area, then you will need to apply for planning permission. You will also need planning permission if you are altering the roof height or shape (which may be the case if you have to raise it for headroom).

Rooflights and dormer can be installed under Permitted Development, but they must not sit forward of the roof plane on the principal elevation, nor must they be higher than the highest part of the existing roof.

The first step you will need to take for any building works is to appoint an architect. It is the architect along with a structural engineer who will work with you to produce a set of drawings and plans based on what you want in terms of layout and space and on what is possible within the structure of the existing property, what is practical for the size of your home and what the council is likely to agree to.

SDA’S FREE GUIDE TO

The Top London Residential
Arhictects 2019

The SDA Build team have meticulously curated a list of talented architects serving the London and Greater London areas. All the architects on our list are RIBA certified and have vetted by Houzz.

I’m ready to download 

If you are applying for planning permission, your architect will then submit the drawings and plans to your local council. Planning permission approvals usually take between 8-10 weeks.

If you are completely sure your project is permitted development, you can start your building work. We would recommend that you check with your local council whether your works fall into the permitted development category. For proof that your building work is lawful you should apply for a lawful development certificate. If your project does not qualify as permitted development, you will need to submit a planning application.

If you or your architect are unsure, visit your local council’s planning department and discuss your plans with them. Make an appointment with a planning officer (most councils are quite helpful), share your plans with them and they will guide you on whether your project falls under permitted development or whether you need to apply for planning permission.

Our team has worked closely with several councils in the South West London area including Hammersmith and Fulham, Kensington and Chelsea, Wandsworth and Westminster City Councils and are familiar with the do’s and don’ts of each of these boroughs.

If you are planning a loft conversion and need some guidance on how to go about it, give us a call on 0208 191 7595 or email us at enquiries@sdabuildlondon.co.uk to discuss how we can help.

To have a look at the kind of work we have done, why not download our free brochure? And if you need any help with managing your building project, our free project management checklist has been hugely popular.

Whether it’s a loft conversion, a home extension, a kitchen extension or a basement conversion, having a single point of contact to manage all aspects of the project is important to ensure the smooth running of a building project.

Any building project whether it’s a loft conversion or any other, requires coordination of a variety of elements and people. Not only do all the professionals involved have to work together, but the materials and fittings have to be ordered at the right time so that they arrive when they are needed.

An individual or a company like ourselves, who understand/s the ins and outs of a building project can coordinate the various elements and professionals involved to make certain that the loft conversion is completed on time and within budget.

So, what are all the elements of a loft conversion that need to be project managed?

• Budget – before you embark on your loft conversion, set your budget. There are two primary costs you need to consider. The first is the cost of the build. There should be no compromise on this as it involves the materials used for the structural construction. The second is the budget for discretionary items such as sanitary ware, light fittings, furniture, flooring, windows and other similar elements. This can be determined, and set based on what you believe you can afford or are willing to spend. Once you have set these budgets, with a give or take of 10%, you can plan the process of the loft conversion.
• Your professionals – You will need to hire a variety of professionals to get your loft conversion off the ground.
  • Architect – The most important person for any building project. Appointing the right architect can make or break your project. You need someone who understands the way you live, your aspirations and your vision. (How to find the right architect)
    

    SDA’S FREE GUIDE TO

    The Top London Residential
    Arhictects 2019

    The SDA Build team have meticulously curated a list of talented architects serving the London and Greater London areas. All the architects on our list are RIBA certified and have vetted by Houzz.

    I’m ready to download 

  • Structural Engineer – The structural engineer will work closely with the architect to understand the current structure of the property, the depth of the foundations, whether it can take a loft conversion with the existing foundations and the kind and weight of additional structural supports needed for a loft conversion.
  • Interior Designer – Not everyone chooses to appoint an interior designer, however, we believe that an interior designer can add great value in helping homeowners use their space in a more efficient manner. We have come across several clients who don’t know what they can or can’t do with a space or are unable to visualise how a space will look with a certain layout, colour scheme and soft furnishings. An interior designer will be able to recommend those final finishing touches to complete the project.
  • Electrician – You will need a certified electrician who is aware of building control regulations to work on the wiring, lighting, and any electrical installations as they will need to issue you with electrical certificates to send to building control.
  • Plumbers and heating engineers – It is important that your plumbing and heating be done by trained and certified professionals as they will also need to issue a gas safety certificate.

• 

  

• Obtaining planning permission– If you are building a loft conversion, you may fall under permitted development and . However, you will still need to inform the council through an application process. If your loft conversion is more involved, you will need planning permission. The application and drawings should be submitted to the council by your architect. Generally, it takes about 8 weeks for an application to be approved.
• Managing Building Regulations – You will also need to appoint a building regulations company. You could appoint the council to do this or an independent company. Whoever you choose to appoint, your builder or project manager will have to call them out at regular intervals during your build to ensure that standards are being met. At the end of your conversion or extension, building regs will come out to do a final check before issuing you with a completion certificate.
• Delivery Timings – For a building project to run smoothly, all the materials and fittings need to be delivered on time. Some have short lead times (3-4 days) and some have much longer lead times (6-8 weeks). It will be your project managers job to know what the lead times are for each element and when orders need to be placed so that everything arrives on time and when needed. For example, sliding doors and windows have a lead time of 6 weeks. The order must be placed at the right time so that they arrive when your builder is ready to fit them. On the other hand, bathroom tiles (if in stock) have practically no lead time. They can be purchased the day before fitting.
• Miscellaneous management – There are several other bits that need to be organised such as skips, scaffolding, rain management covers, roof tiles, steel beams, cement … the list goes on. All these have to be managed from a cost and time perspective so that the loft conversion or building project is completed on budget and in time.

To manage all these aspects of a loft conversion or any build for that matter, you need someone who understands ‘builder language’ and who knows how to coordinate all these aspects. Whilst we recommend the property owner to be involved in the process at the get go to make important decisions, we believe that appointing an experienced project management team, like SDA Build London, will make the building of your loft conversion, a smoother process.

Give us a call on 02081917595 or email us at enquiries@sdabuildlondon.co.uk to discuss how we can help.

To have a look at the kind of work we have done, why not download our free brochure? And if you need any help with managing your building project, our free project management checklist has been hugely popular.